BOX ANCHOR

ON/OFFSHORE SPIKE 

DANIK HOOK 

SINGLE QUICK CLEAT 

 DOUBLE QUICK CLEAT

       About the Box Anchor 

The Box Anchor is designed to do all the work for you. Just kill the engine and toss the anchor overboard, it’s that easy. The Box Anchor will hit the bottom, role to its side, and set within 1ft, no need to power down.

The Box Anchor’s unique patented design allows it to hold your boat at a 45-degree angle from the bottom, digging the downward facing flukes firmly into the bottom without snagging them permanently on debris. When it comes to retrieval, just pull the line to bring the boat over the top of the anchor and the lack of upward facing surface area will allow the Box Anchor to pop right off the bottom. This same principal works in wind or current change.

 Baby Box Anchor

Works great in hard pack or soft sand, or in shallow water! The perfect tool for securing your boat in that perfect beach spot, or even off rocky or shale shoreline! Just drive the tubular handle downward to deliver the spike blade into the shoreline, then tie your boat off to the lower ring. Removes as easily as it drives in: just drive the handle upward.

Rocky or shale shorelines: Drive the spike a few feet offshore, where the ground is softer. The open, tubular handle won’t trap air, water, or debris -- allowing for easy use in shallow water. The top ring is for a line and buoy. * HOT DIP GALVANIZED inside and out to prevent corrosion.

RUBBER handle -- built to last!

About The Danik Hook

The Danik Hook is a revolutionary product that simplifies the knot tying and anchoring process. Tested to hold up to 8,000 lbs, the stainless steel Danik Hook is extremely versatile and easy to use. Simply attach one end of the line to your anchor and the other end through the line passage in the Danik Hook. The anchor line slides freely through the passage when the Danik Hook lever is pushed down, but is held firmly in place when released. A unique mechanism grips the line at the desired location, providing an adjustable clip anywhere on the line, easily adapting to any depth of water without ever tying a knot. When up on shore the Danik Hook is also ideal to be used with the Slide Anchor Shore Spike by simply driving the Spike into the beach, clipping the Danik Hook to the lower ring, and adjusting for tightness. The uses for the Danik Hook are endless; it is an invaluable addition to your boat.